Uploaded image for project: 'Qt Automotive Suite'
  1. Qt Automotive Suite
  2. AUTOSUITE-1525

iMX6 installer image has invalid partition - unable to boot



    • Bug
    • Resolution: Invalid
    • P0: Blocker
    • None
    • 5.12.8, 5.13.2
    • Device Images
    • None
    • Linux/Wayland


      I've downloaded Qt Automotive Suite iMX6 images ver.5.12.6 and 5.13.2 from the installer (see release dates in the attached screenshot).
      Booting the device with this images gives the same error message for both versions 5.12.6 and 5.13.2:

      U-Boot 2019.07-0+ge1cbe8c74e (Sep 19 2019 - 14:34:55 +0000)
      CPU:   Freescale i.MX6Q rev1.5 at 792MHz
      CPU:   Industrial temperature grade (-40C to 105C) at 22C
      Reset cause: POR
      DRAM:  2 GiB
      PMIC:  device id: 0x10, revision id: 0x21, programmed
      MMC:   FSL_SDHC: 1, FSL_SDHC: 2, FSL_SDHC: 0
      Loading Environment from MMC... OK
      In:    serial
      Out:   serial
      Err:   serial
      Model: Toradex Apalis iMX6 Quad 2GB IT V1.1C, Serial# 05184708
      Net:   using PHY at 7
      FEC [PRIME]
      Hit any key to stop autoboot:  0 
      Setting bus to 0
      Valid chip addresses:
      ** Invalid partition 2 **
      Booting from SD card
      sdboot failed
      Setting bus to 0
      Valid chip addresses:
      ** Invalid partition 2 **
      Booting from internal eMMC chip...
      emmcboot failed
      switch to partitions #0, OK
      mmc1 is current device
      Scanning mmc 1:1...
      54318 bytes read in 19 ms (2.7 MiB/s)
      Card did not respond to voltage select!
      starting USB...
      Bus usb@2184000: USB EHCI 1.00
      Bus usb@2184200: USB EHCI 1.00
      scanning bus usb@2184000 for devices... 1 USB Device(s) found
      scanning bus usb@2184200 for devices... 2 USB Device(s) found
             scanning usb for storage devices... 0 Storage Device(s) found
             scanning usb for ethernet devices... 0 Ethernet Device(s) found

      I've checked also iMX6 image for version 5.14.1 - it does boot and Neptune 3 UI shows up properly.


        No reviews matched the request. Check your Options in the drop-down menu of this sections header.



            sapiippo Samuli Piippo
            sabramenkova Svetlana Abramenkova
            0 Vote for this issue
            2 Start watching this issue



              Gerrit Reviews

                There are no open Gerrit changes