Details
-
Bug
-
Resolution: Invalid
-
P0: Blocker
-
None
-
5.12.8, 5.13.2
-
None
-
Linux/Wayland
Description
I've downloaded Qt Automotive Suite iMX6 images ver.5.12.6 and 5.13.2 from the installer (see release dates in the attached screenshot).
Booting the device with this images gives the same error message for both versions 5.12.6 and 5.13.2:
U-Boot 2019.07-0+ge1cbe8c74e (Sep 19 2019 - 14:34:55 +0000) CPU: Freescale i.MX6Q rev1.5 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 22C Reset cause: POR DRAM: 2 GiB PMIC: device id: 0x10, revision id: 0x21, programmed MMC: FSL_SDHC: 1, FSL_SDHC: 2, FSL_SDHC: 0 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Apalis iMX6 Quad 2GB IT V1.1C, Serial# 05184708 Net: using PHY at 7 FEC [PRIME] Hit any key to stop autoboot: 0 Setting bus to 0 Valid chip addresses: ** Invalid partition 2 ** Booting from SD card sdboot failed Setting bus to 0 Valid chip addresses: ** Invalid partition 2 ** Booting from internal eMMC chip... emmcboot failed switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... 54318 bytes read in 19 ms (2.7 MiB/s) Card did not respond to voltage select! starting USB... Bus usb@2184000: USB EHCI 1.00 Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found
I've checked also iMX6 image for version 5.14.1 - it does boot and Neptune 3 UI shows up properly.
